CAT 299D3

Description

ENGINE Gross Power - SAE J1995 98 HP Net Power - SAE 1349 95 HP Displacement 232 in³ Bore 3.9 in Stroke 4.7 in Net Power 95 HP Net Power - ISO 9249 95 HP Engine Model Cat C3.8 DIT (turbo) Peak Torque - 1,500 rpm - SAE J1995 246 ft·lbf OPERATING SPECIFICATIONS Rated Operating Capacities - 35% Tipping Load 3480 lb Tipping Load 9945 lb Breakout Force - Tilt Cylinder 7270 lb Breakout Force - Lift Cylinder 6162 lb Rated Operating Capacity with Optional Counterweight 5240 lb Ground Contact Area - With 400 mm/15.7 in Track 2184 in² Ground Pressure - With 400 mm/15.7 in Track 5.3 psi Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted). Rated Operating Capacities - 50% Tipping Load 4970 lb Ground Contact Area - With 450 mm/17.7 in Track 2463 in² Ground Pressure - With 450 mm/17.7 in Track 4.7 psi WEIGHTS Operating Weight 11464 lb Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted). DIMENSIONS Length - Track on Ground 69.6 in Overall Length - Track 89.4 in Height - Top of Cab 83.6 in Ground Clearance 9.6 in Departure Angle 33° Maximum Dump Angle 54° Vehicle Width (450 mm/17.7 in tracks) 78 in Turning Radius from Center - Coupler 58.1 in Rack Back Angle - Maximum Height 81° Reach - Maximum Lift/Dump 33.6 in Vehicle Width (400 mm/15.7 in tracks) 76 in Bucket Pin Reach - Maximum Lift 19.4 in Bucket Pin Height - Carry Position 7.1 in Turning Radius from Center - Bucket (racked) 91.1 in Maximum Reach - With Arms Parallel to Ground 51.9 in Length - Without Bucket 125.5 in Length - With Bucket on Ground 154.7 in Clearance at Maximum Lift and Dump 94.5 in Bucket Pin Height - Maximum Lift 126.3 in Maximum Overall Height 158.7 in Roll Back Angle 25° Turning Radius from Center - Machine Rear 74 in Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 850 CCA battery, no optional counterweights and manual quick coupler (unless otherwise noted). HYDRAULIC SYSTEM Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 4061 psi Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi Hydraulic Flow - Standard - Hydraulic Power (Calculated) 44 HP Hydraulic Flow - Standard - Loader Hydraulic Flow 23 gal/min Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 32 gal/min Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 76 HP CAB ROPS ISO 3471:2008 FOPS ISO 3449:2005 Level I POWER TRAIN Travel Speed - Forward or Reverse - Two Speed 8.4 mile/h Travel Speed - Forward or Reverse - One Speed 5.2 mile/h SERVICE REFILL CAPACITIES Cooling System 4.1 gal (US) Engine Crankcase 3.5 gal (US) Fuel Tank 31.7 gal (US) Hydraulic System 14.5 gal (US) Hydraulic Tank 10.3 gal (US) Diesel Exhaust Fluid (DEF) Tank 5 gal (US) NOISE LEVEL Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. Inside Cab* 83 dB(A) Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. Outside Cab** 104 dB(A) AIR CONDITIONING SYSTEM (IF EQUIPPED) Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.